24.2.16

Acid Base Learner Series: Respiratory Acidosis in detail

A respiratory acidosis is a primary acid-base disorder in which arterial pCO2 rises to a level higher than expected.


At onset, the acidosis is designated as an 'acute respiratory acidosis'. The body's initial compensatory response is limited during this phase.
As the body's renal compensatory response increases over the next few days, the pH returns towards the normal value and the condition is now a 'chronic respiratory acidosis'.
The differentiation between acute and chronic
is determined by time but occurs because of the renal compensatory response (which is slow).

 Causes of Respiratory Acidosis:
The arterial pCO2 is normally maintained at a level of about 40 mmHg by a balance between production of CO2 by the body and its removal by alveolar ventilation. If the inspired gas contains no CO2 then this relationship can be expressed by:

paCO2 is proportional to VCO2 / VA

where:
VCO2 is CO2 production by the body
VA is Alveolar ventilation
An increase in arterial pCO2 can occur by one of three possible mechanisms:
  • Presence of excess CO2 in the inspired gas
  • Decreased alveolar ventilation
  • Increased production of CO2 by the body
CO2 gas can be added to the inspired gas or it may be present because of rebreathing : Anaesthetists are familiar with both these mechanisms. In these situations, hypercapnia can be induced even in the presence of normal alveolar ventilation and normal carbon dioxide production by the body.
An adult at rest produces about 200mls of CO2 per minute

Acid Base Balance Series: What is the 'osmolar gap'?

NB: 'Osmolar gap' has several alternative names: 'osmol gap', 'osmole gap', 'osmolarity gap' & 'osmolal gap'; these all refer to the same thing. For consistency, the term "osmolar gap" is used exclusively through this book.

What is the 'osmolar gap'?

Definitions
  • An osmole is the amount of a substance that yields, in ideal solution, that number of particles (Avogadro’s number) that would depress the freezing point of the solvent by 1.86K
  • Osmolality of a solution is the number of osmoles of solute per kilogram of solvent.
  • Osmolarity of a solution is the number of osmoles of solute per litre of solution.
So osmolality is a measure of the number of particles present in a unit weight of solvent. It is independent of the size, shape or weight of the particles. It can only be measured by use of a property of the solution that is dependent on the particle concentration. These properties are collectively referred to as Colligative Properties. Osmolality is measured in the laboratory by machines called osmometers. The units of osmolality are mOsm/kg of solute
Osmolarity is calculated from a formula which represents the solutes which under ordinary circumstances contribute nearly all of the osmolality of the sample. There are many such formulae which have been used. One widely used formula for plasma which is used at my hospital is:

Calculated osmolarity = (1.86 x [Na+]) + [glucose] + [urea] + 9

Note regarding units: For the above equation, all concentrations are in mmol/l, and not mg/100mls. The result will then be in mOsm/l of solution. This equation is often expressed differently in North America where glucose & blood urea nitrogen (BUN) are reported in

Acid Base Learner Series: The Urinary Anion Gap

The Urinary Anion Gap

The cations normally present in urine are Na+, K+, NH4+, Ca++ and Mg++.
The anions normally present are Cl-, HCO3-, sulphate, phosphate and some organic anions.
Only Na+, K+ and Cl- are commonly measured in urine so the other charged species are the unmeasured anions (UA) and cations (UC).
Because of the requirement for macroscopic electroneutrality, total anion charge always equals total cation charge, so:
Cl- + UA = Na+ + K+ + UC
Rearranging:

Urinary Anion Gap = ( UA - UC ) = [Na+]+ [K+] - [Cl-]

Clinical Use

Key Fact: The urinary anion gap can help to differentiate between GIT and renal causes of a hyperchloraemic metabolic acidosis.
It has been found experimentally that the Urinary Anion Gap (UAG) provides a rough index of urinary ammonium excretion. Ammonium is positively charged so a rise in its urinary concentration (ie increased unmeasured cations) will cause a fall in UAG

Acid Base Learner Series: The Delta Ratio

Definition

This Delta Ratio is sometimes useful in the assessment of metabolic acidosis. As this concept is related to the anion gap (AG) and buffering, it will be discussed here before a discussion of metabolic acidosis. The Delta Ratio is defined as:

Delta ratio = (Increase in Anion Gap / Decrease in bicarbonate)

Others have used the delta gap (defined as rise in AG minus the fall in bicarbonate), but this uses the same information as the delta ratio and has does not offer any advantage over it.

How is this useful?

In order to understand this, consider the following:
If one molecule of metabolic acid (HA) is added to the ECF and dissociates, the one H+ released will react with one molecule of HCO3- to produce CO2 and H2O. This is the process of buffering. The net effect will be an increase in unmeasured anions by the one acid anion A- (ie anion gap increases by one) and a decrease in the bicarbonate by one.
Now, if all the acid dissociated in the ECF and all the buffering was by bicarbonate, then the increase in the AG should be equal to the decrease in bicarbonate so the

Acid Base Learner Series: The Anion Gap

The Anion Gap: A balance 

Definition & Clinical Use

The term anion gap (AG) represents the concentration of all the unmeasured anions in the plasma. The negatively charged proteins account for about 10% of plasma anions and make up the majority of the unmeasured anion represented by the anion gap under normal circumstances. The acid anions (eg lactate, acetoacetate, sulphate) produced during a metabolic acidosis are not measured as part of the usual laboratory biochemical profile. The H+ produced reacts with bicarbonate anions (buffering) and the CO2 produced is excreted via the lungs (respiratory compensation). The net effect is a decrease in the concentration of measured anions (ie HCO3) and an increase in the concentration of unmeasured anions (the acid anions) so the anion gap increases.
AG is calculated from the following formula:
Anion gap = [Na+] - [Cl-] - [HCO3-]
Reference range is 8 to 16 mmol/l. An alternative formula which includes K+ is sometimes used particularly by Nephrologists. In Renal Units, K+ can vary over a wider range and have more effect on the measured Anion Gap. This alternative formula is:
AG = [Na+] + [K+] - [Cl-] - [HCO3-]
The reference range is slightly higher with this

Acid base balance: A complete explanation for Students, postgraduate Physicians especially Anesthesia Students

Definitions

The definitions of the terms used here to describe acid-base disorders are those suggested by the Ad-Hoc Committee of the New York Academy of Sciences in 1965. Though this is over 35 years ago, the definitions and discussion remain valid today.

Basic Definitions

  • Acidosis - an abnormal process or condition which would lower arterial pH if there were no secondary changes in response to the primary aetiological factor.
  • Alkalosis - an abnormal process or condition which would raise arterial pH if there were no secondary changes in response to the primary aetiological factor.
  • Simple (Acid-Base) Disorders  are those in which there is a single primary aetiological acid-base disorder.
  • Mixed (acid-Base) Disorders are those in which two or more primary aetiological disorders are present simultaneously.
  • Acidaemia - Arterial pH < 7.36 (ie [H+] > 44 nM )
  • Alkalaemia - Arterial pH > 7.44 (ie [H+] < 36 nM )

An acidaemia of course must be due to an acidosis so is an indicator of the presence of this disorder. In mixed acid-base disorders, there may be co-existing disorders each having opposite effects on the ECF pH so a quick check of the arterial pH is insufficient to fully indicate all primary acid-base disorders. In mixed disorders, it does indicate in general terms the most severe disorder. That is, if the arterial pH is 7.2 (an acidaemia), there must be an acidosis present, and any alkalosis present must be of lesser magnitude. (This idea is the basis of an initial step in the systematic approach to analysis of arterial blood gas results).

The Disorders

The 4 simple acid base disorders are:
  • Respiratory acidosis
  • Respiratory alkalosis
  • Metabolic acidosis
  • Metabolic alkalosis.
Respiratory disorders are caused by abnormal processes which tend to alter pH because of a primary change in pCO2 levels.
Metabolic disorders are caused by abnormal processes which tend to alter pH because of a primary change in [HCO3-].

Correct Termin

4.2.16

First Aid USMLE collection



Download Usmle First Aid collection as FOAMed


1. First Aid for the USMLE Step 1 2016, 26e (51.7 MB) Download


2. First Aid for the USMLE Step 2 CK, 8e (31.56 MB) Download
3. First Aid for the USMLE Step 2 CS, 5e (2.81 MB) Download
4. First Aid for the USMLE Step 3, 3e (11.81 MB) Download
5. First Aid Cases for the USMLE Step 1, 3e (19.05 MB) Download
6. First Aid Cases for the USMLE Step 2 CK, 2e (5.16 MB) Download
7. First Aid Q&A for the USMLE Step 1, 3e (5.85 MB) Download
8. First Aid Q&A for the USMLE Step 2 CK, 2e (5.11 MB) Download
9. First Aid for the Basic Sciences Organ Systems, 2e (24.97 MB) Download
10. First Aid for the Basic Sciences, General Principles, 2e (29.99 MB) Download

credit: Sharer

#Foamed
Related Posts Plugin for WordPress, Blogger...